|
DIGITAL SURROUND PROCESSOR
Prices are subject to modification without prior notice
* not for sale as single components (ONLY INCLUDED IN SYSTEMS)
State of the Art 7.1 Channel Surround Processor/System Controller
Software-upgradeable and HDTV-compatible, the AV1 is fluent in every popular sound processing dialect. And with no fewer than 26 audio and video inputs, it plays well with others.
SPECIFICATIONS
Warranty
2 years
First Manufactured
2005
Last Manufactured
2008
Audio Input & Output Connectors
Analog Audio Inputs
Eight stereo (RCA) or five stereo and one 5.1-channel or two stereo and two 5.1-channel connectors
Digital Audio Inputs
Four S/P-DIF coaxial (RCA) and four S/P-DIF optical (TosLink) connectors; coaxial and optical input connectors conform to IEC-958, S/P-DIF standards; accepts 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates; accepts 16–24 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formats
Audio Output(s)
Eight unbalanced (RCA) connectors for front L/R, center, subwoofer, side L/R and rear L/R
Audio Processing Section
A/D Conversion
24-Bit, 96kHz, dual-bit architecture
D/A Conversion
24-Bit, 44.1kHz to 192kHz, multi-bit architecture
Frequency Response
10Hz to 20kHz, +0.05dB/–0.1dB, –0.5dB at 40kHz, reference 1kHz
THD + Noise
Below 0.008% at 1kHz, maximum output level
Dynamic Range
108dB minimum, 22kHz bandwidth
S/N Ratio
108dB minimum, 22kHz bandwidth
Input Sensitivity
200mV RMS (2V RMS for maximum output level) at 0dB input gain
Output Level
150mV RMS typical, 6Vrms maximum; maximum value with full-scale input signal and volume at +12dB
Video Input & Output Connectors
Video Inputs
Five composite (RCA), five S-video and three component video (RCA)
Video Outputs
One composite (RCA), one S-video and one component (RCA)
Composite & S-video Performance
Compatibility
NTSC, PAL and SECAM
Impedance
75 Ohms
Bandwidth
>25MHz
Component Video Performance
Compatibility
3-Channel (Y/Pr/Pb), format-independent
Impedance
75 Ohms
Insertion Loss
<3dB
Bandwidth
>150MHz
General
Trigger Outputs
One power on/off and one programmable connector on 5-pin DIN
RS-232 Serial Input/Output
Two 9-pin D-sub connectors
Power Requirements
90 – 250 VAC, 50Hz – 60Hz, 60W (universal line input), detachable power cord
Rack Mounting
Optional brackets are available for installation in a standard 19" equipment rack (two rack units required for AV1).
Dimensions (H x W x D)
3-13/16" x 17-5/16" x 14-7/8" (97mm x 440mm x 377mm)
Weight
17 lb/7.7kg
|
